How to enable or disable Sleeper Berth Status for a Vehicle in Fleet Dashboard

    Audience Fleet Managers, Fleet Admins
    Applies To Fleet Dashboard

     

    Introduction

    Fleet Managers/Admins can enable or disable the Sleeper Berth Status for any vehicle from the Fleet Dashboard. The status change would impact every driver operating the vehicle and Fleet Managers/Admins can revert the status anytime. The change in status is reflected in the Driver App only if the driver has a version V60 or higher. 

    Here is a step-by-step process to enable or disable the status of a vehicle in the Fleet Dashboard.

     

    Steps: Enabling or Disabling Sleeper Berth Status

    Enabling Sleeper Berth Status

    1. Log in to Fleet Dashboard and select Admin.
      Admin.png
    2. Select Vehicles and select the vehicle you want to edit by selecting Edit Vehicle from the drop-down menu.
      enable_PC_1.png
    3. Scroll down to the Vehicle Gateway Preferences section and check the Allow Sleeper Berth Status box to enable it.

      Note: Vehicle Gateway must be assigned to the vehicle in order for these settings to appear.

      enable_Sleeper_Berth_Status.png
    4. Select Save.
      enable_PC_4.png

    Disabling Sleeper Berth Status

    1. Follow Step 1 and Step 2 from the above section.
    2. Scroll down to the Vehicle Gateway Preferences section and uncheck the Allow Sleeper Berth Status box to disable it.

      Note: Vehicle Gateway must be assigned to the vehicle in order for these settings to appear.

      disable_Sleeper_Berth_Status.png
    3. Select Save.
      enable_PC_4.png
    4. When Allow Sleeper Berth Status is unchecked the driver connected to the vehicle cannot see the option to select Sleeper Berth.

    disable_Sleeper_Berth_Status_1.png

     

    Note: Driver must be using Driver App Version V60 or higher.

     

    Related Content

    Was this article helpful?
    9 out of 11 found this helpful

    Share this with others