| Audience | Fleet Admins, Fleet Managers |
| Applies To | Fleet Dashboard > Admin > Company |
Introduction
Drivers can access their log form in the driving lock screen when using Yard Move once the vehicle is stationary.
| Note: This feature is in beta phase and is going to be released in July 2024. Drivers must use version 75 of the Motive Driver application. |
Steps: Accessing log form from the Driver App when using Yard Move
1. Log in to the Driver App and select Logs.
2. Tap your duty status in the top left corner to change your duty status.
3. On the duty status screen, select Yard Move.
| Note: You are required to enter a note of at least 4 characters. |
5. Once this is complete, a confirmation banner shows indicating that yard move is enabled.
6. Once the vehicle reaches a speed of 5 mph, a driving lock screen shows the Yard Move status.
7. Once the vehicle is in motion, you enter the driving lock screen.
8. Bring the vehicle to a stop, you can see the driving lock screen show Stationary in the top left corner.
9. Tap Return to Log to access the log form.
10. In the log form, tap the Trailers field to make any changes.
11. After adding the required information, tap Save.