What is the Driver App For Exempt (Not Required) Drivers

     

    Audience Not Required Drivers
    Applies To Driver App

     

    Introduction

    Driver App provides a customized view for the local and exempt Drivers as their needs are different from the ones driving with ELDs.

     

    How "Not Required" Driver App Helps You

    With this Driver App view designed for exempt Drivers, the users can easily access features they have to use in everyday life.

     

    Driver App for Exempt Drivers Overview

     

    App Menu

    The menu of the local Driver mobile app provides a view of the following:

    • The Documents under the Dispatches allow the Drivers to upload fuel receipts and other documentation. The information filled in can be used for IFTA purposes.

    mceclip3.png

     

    Inspections

    The inspection process is different for the local Drivers and to cater to their needs, the section reflects the following:

    • The Driver can see their Current Vehicle.

    • When connected to a vehicle, the Driver can see Drive Time and Distance.

    • Drivers can perform a pre-trip inspection when connected with a vehicle.

    92.jpg

     

    93.jpg

    Drive Time & Distance

    The Drive Time and Distance can be accessed by the Driver at any time of the day. The details of these are as follows:

    • Throughout the day, the Driver can view Total Drive Time and Total Distance on the Logs Detail screen.

    • Activity of the past days is available on the Driver App.

    94.jpg

     

    Driving Events

    Driving Events enable the Driver to tap on a specific day and view details including the following:

    • The Driving tab shows all the driving events for the whole selected day.

    • The Inspection tab shows the details of the inspections done that day.

    mceclip0.png

     

    App Settings

    The settings on the Driver App for the local Drivers are customized for the following events:

    • The General subsection can be accessed from the settings section.

    • The Driver can add or change values for the Home Terminal Time Zone and Odometer Units.

    mceclip1.png

    mceclip2.png

     

    Related Content

    Was this article helpful?
    9 out of 11 found this helpful

    Share this with others