If your AI Omnicam is not recording, and you cannot see any LED light on the AI Omnicam, it can be due to the following reasons:
- AI Omnicam’s software is not responding.
- AI Omnicam is not getting 12 V or 24 V power supply.
Here's how you can solve this issue:
- Perform the pinhole reset on your AI Omnicam.
- If the camera does not start recording after the pinhole reset, check the power supply and ensure the cables are providing 12V or 24V of power.
| Note: If the powered-off LED light still does not transition into a solid white LED light, contact Motive Support. Ensure sharing your camera’s serial number or your vehicle ID with the Motive representative. |
Was this article helpful?
Share this with others