| Audience | Fleet Admins, Installers |
| Applies To | AI Omnicam |
Introduction
Standalone AI Omnicam is an enhanced, flexible version of the AI Omnicam, now available for independent deployment. With this update, you can assign AI Omnicam directly to assets without relying on a Vehicle Gateway or AI Dashcam. This streamlined setup allows for a quick, independent installation across a wide range of assets, including trailers, flatbeds, and more.
Installation Requirements: AI Omnicam
What comes in the box?
- Front housing (1)
- Rear housing (1)
- Metal Plate (1)
Tools
- Grommet (1)
- M3 screws (10)
- M4 bolts (4)
- Washer (8)
- Locknut (4)
- Allen key (1)
- Reset pin (1)
Steps
1. Log in to the Motive Fleet App from the Google Play Store or Apple App Store.
2. Go to the Devices tab.
3. Follow the in-app instructions to guide you through installing the AI Omnicam.
4. Visit gomotive.com/omnicam-install for more detailed information on recommended install locations depending on your vehicle/asset type and creating and assigning the camera to the vehicle/asset profile.
5. The following channels are for troubleshooting:
- Phone: 855-434-3564
- Email: support@gomotive.com
- Help Center: helpcenter.gomotive.com
6. Scan the provided QR code or visit gomotive.com/omnicam-install for detailed information and recommendations on installing and assigning your AI Omnicam.
Related Content