Keep the HOS logs accurate by updating the duty status as your day changes and certifying the logs daily.
Before you begin
- Driving time is recorded automatically by the Vehicle Gateway when the vehicle moves. You do not need to enter driving time manually.
- For logging duty statuses other than driving, the vehicle must be fully stopped to change your duty status manually.
View your logs
- Log in to the Motive Driver App.
-
Tap Logs from the home screen or the main menu.
- Tap the log for Today to view your log for the current day.
| Note: Before viewing the current date's log, you have to sign and certify all previous logs if they are not already certified. |
-
Select any date from the Last 14 Days section to view old logs.
| Note: You can view logs older than the last 14 days on the Motive Fleet Dashboard. Contact your fleet manager for access to older logs. |
Edit an incorrect duty status
| Note: Automatically recorded drive time by an ELD device such as Motive Vehicle Gateway cannot be edited, deleted, or reclassified later on. Only other manually entered duty statuses can be edited to a certain extent. For more details, see Log Editing. |
- Follow the instructions given above to open the log you need to fix.
-
Select the status entry you want to change and tap Edit.
-
Use the slider or manually enter the Start Time and End Time.
- Tap any duty status to change the currently logged duty status.
- Edit the Location if it is incorrect.
- Add Notes explaining the reason for the change because notes are required for all log edits.
-
Tap Save.
Certify your log
- At the end of your day, open Logs and select today's log.
- Review each entry on the log graph for accuracy.
- Open the Sign tab.
-
Tap Sign Log.
-
Draw your signature and tap Agree to certify the log.
-
If your fleet has the Compliance tab enabled, go to Unsigned logs.
- Draw your signature and tap Agree.
Accept or reject edits suggested by your fleet manager
If your fleet manager suggests a change to a past log, you will receive a pending edit notification in the Driver App.
- Log in to the Driver App and go to Logs from the main menu.
-
From the Log Edits section, open the suggested edit and review the change and reason given.
- Tap ✔ to accept or X to reject the suggested edit.
How to know it worked: Approved edits apply immediately, and you will be prompted to re-sign that day's log. Rejected edits leave your log unchanged. Always include a clear, truthful note on any edit. FMCSA rules require an explanation for every change to your log.
Share this with others