Your HOS clocks show exactly how much drive, shift, cycle, and break time you have left, so checking them regularly is the easiest way to avoid a violation before it happens.
Where to find HOS clocks
Open the Motive Driver App and tap Logs, or view the HOS clocks from the home screen. A simplified version also appears at the top of your screen when the vehicle is moving. The Motive Driver App shows the following four HOS clocks:
- Drive clock tracks your remaining drive time: 11 hours in the U.S., 13 in Canada. Once it hits zero, you must stop driving until you complete a qualifying break.
- Shift clock tracks your total on-duty window: 14 hours in both the U.S. and Canada. This clock keeps running even during short breaks; it only pauses during a qualifying off-duty or sleeper berth period.
- Cycle clock tracks your accumulated on-duty time over several days (for example, 60 hours in 7 days or 70 hours in 8 days in the U.S.). This resets only after you complete a full off-duty reset period, like 34 consecutive hours off.
- Break/Rest clock tracks when your next required break is due: a 30-minute break in the U.S. after 8 cumulative hours of driving, or the 8/2 split or 10-hour rest under Canadian rules.
What the colors mean
- Green: You have ample time remaining.
- Yellow: You're approaching a limit; start planning your next stop or break now.
- Red: You're at or over the limit. Stop driving if required by your active HOS rule and take corrective action immediately.
How to avoid common violations
- Shift violations happen when you exceed 14 hours of on-duty and driving time in a shift for US property cycles. Watch your Shift clock throughout the day; not just your drive clock, you can run out of shift time before you run out of drive time.
- 30-minute break violations happen when you drive more than 8 cumulative hours without a qualifying break in applicable US property operations. The break can be On Duty (not driving), Off Duty, or sleeper berth; any non-driving period of 30+ consecutive minutes counts.
- Cycle violations happen when you exceed your rolling 60/7 or 70/8-hour limit for US property cycles. Check your Cycle clock before accepting a new load, not just at the start of your shift. It reflects your rolling total across the week, not just today.
Select Personal Conveyance or Yard Move before moving
If you need to use Personal Conveyance (PC) or Yard Move (YM), connect the Driver App to the Vehicle Gateway and select the applicable duty status (PC or YM) before vehicle movement is recorded. You cannot retroactively classify automatically recorded drive time as PC or YM:
- Drivers cannot claim unidentified automatically recorded drive time as PC or YM from the Driver App.
- Fleet admins cannot assign unidentified automatically recorded drive times as PC or YM from the Dashboard.
- Unidentified automatically recorded trips must be claimed or assigned as On Duty or Driving.
| Note: If automatically recorded drive time was recorded as Driving but should have been Personal Conveyance (PC) or Yard Move (YM), a fleet admin can use Ignore Drive Time to flag it internally. Ignore Drive Time allows HOS analyzers to treat the time as non-driving duty status time for internal HOS clocks and violation alerts without altering the driver's official RODS (log PDF or output data file). |
Use the HOS recap to plan ahead
- Open Logs and tap Recap.
- This shows hours used today, hours remaining in your current cycle, and hours you will regain over the next several days, which is useful for planning multi-day trips before you're already running low.
When clocks do not behave as expected
- A clock stays red longer than expected: Check your Home Terminal Time Zone under Settings. An incorrect time zone can make off-duty periods look shorter than they actually were, delaying a cycle reset.
- Crossing between the U.S. and Canada: The app can switch cycles automatically when both US and Canadian cycles are configured and a trip begins in one country and ends in the other. Otherwise, switch the cycle manually.
- You're on Split Sleeper Berth: For US property cycles, your clocks recalculate only after both qualifying rest periods are complete. Until then, your available hours may not change.
| Note: Ask your fleet admin to enable notifications for approaching violations so the Driver App can warn you before you hit a limit rather than after, giving you time to adjust your plan. |
Share this with others