Submit a Driver Vehicle Inspection Report (DVIR)

Fleets are required to complete a pre-trip and post-trip Driver Vehicle Inspection Report (DVIR) everyday to stay compliant with FMCSA rules and locate vehicle issues early. Driver App pre-trip and post-trip inspections replace manual DVIRs and meet FMCSA requirements.

Before you begin

  • Stay connected to your vehicle while inspecting it. This lets Motive access the actual odometer reading from the Vehicle Gateway instead of leaving the field blank.
  • Ensure the vehicle or trailer you need is already in your company's fleet list because fleets can only inspect vehicles from the Driver App that their fleet admin has added to the fleet.

Conduct daily vehicle inspections from the Driver App 

  1. Open the Motive Driver App > tap Logs.

    image (6).png
  2. Select the log under today.

    image (7).png
  3. Tap Inspection.
  4. Tap +(Plus).

    image (8).png
  5. Tap Vehicle Inspection. 

    image (9).png
  6. Select the required vehicle.

    image (10).png
  7. Tap Next.

    image (11).png
  8. From the Vehicle Inspection screen, Edit the General Info if necessary. 

    image (12).png
  9. Select the Inspection Type from the dropdown. 

    image (13).png
  10. Enter Fleet Requirements. 
  11. Tap the thumbs-up icon if a vehicle part is working fine. 
  12. Tap the exclamation icon sign if a vehicle part has any defects. 

    image (14).png
  13. Select defect type from Major, Minor, or Not sure. 

    image (15).png
  14. Add Notes and upload an image for the defect. 
  15. On the Is this vehicle or asset safe to drive? prompt, selecting Yes leads to the signature. Selecting No marks the vehicle as unsafe, sends an immediate alert to the fleet manager, and may prevent future drivers from connecting to it until the defect is resolved. 
  16. Once done, tap Save.

    vehicle inspection prompt.png
  17. Tap Certify & Save to submit the form, and the fleet manager will view it on the Motive Fleet Dashboard. 

    image (16).png
  18.  Asset Inspection creation pop up displays, tap Yes if required.

    iphone16pro-full-3.png

Note: If a vehicle is marked unsafe during an inspection, Motive provides end-to-end visibility across the Fleet Dashboard and Driver App.

  • Fleet Managers: Receive automated alerts to take immediate action (for example, marking equipment out of service).
  • Drivers: If a driver attempts to select a vehicle previously marked unsafe, they will receive a blocking alert. Also, they have the option to create inspection if the business requires it. 

Resolve open defects from the Driver App

  1. Open the Motive Driver App, tap Logs.

    image (6).png
  2. Select the log you want to resolve the defects for. 

    image (18).png
  3. Tap the Inspection tab.
  4. Find an inspection report with Open defects and tap View Details.

    image (19).png
  5. Tap Defects.

    image (20).png
  6. Tick the box for the listed defect you want to resolve.

    image (21).png
  7. Enter your name under Resolved by.
  8. Tick the box for Defect Status and add a Note if necessary. 
  9. Draw your signature and tap Certify.

    image (22).png
  10. The defect status changes to resolved.

    image (23).png
Note: Defects on a spot inspection are linked to a work order and can't be resolved from the Driver App. They are resolved when the work order is marked complete. If your inspection reported a defect, your fleet's maintenance team will update its status once it is resolved. Fleets will see this reflected in their inspection history, and can review or acknowledge the correction from there.
Was this article helpful?

Share this with others