| Audience | Fleet Admins, Fleet Managers |
| Applies To | Fleet Dashboard |
Introduction
Fleet Managers and Fleet Admins can utilize the Split Sleeper toggle feature for Drivers using US cycles in the Motive Fleet Dashboard.
| Note: Drivers must complete both qualifying periods of the split sleeper berth to avoid Hours of Service (HOS) violations. Once the second off-duty period is completed, the Driver’s clocks recalculate, and potential violations related to the timing of the split may be resolved. However, any violations unrelated to the split sleeper rule (e.g., driving beyond the allowed hours before the split) are not removed. Violations may still appear before both qualifying periods are completed. |
|
Note: HOS violations displayed in the Driver App are not actual violations and Drivers are recommended to always use DOT Inspection mode during roadside inspections. The integrity of their records is maintained and no violation flags are presented to enforcement agents. |
Steps: Viewing Split Sleep Hours in the Fleet Dashboard
1. Log into the Motive Fleet Dashboard. The Fleet View displays.
2. Click the Drivers tab to view a list of Drivers in your fleet.
3. Select a Driver to view their off-duty and on-duty hours. If the Driver has completed a qualifying split sleeper berth period (i.e. 2 hours Off-Duty/ Sleeper Berth), the hours are available to view.
| Note: This toggle is only available for Drivers operating under US cycles. |
4. The Summary tab has various sections of Driver's information. In the Driver's Hours of Service section, a toggle for Split Sleeper is given.
5. Click the toggle for Show Clocks with Split SB Provision to turn it on.
6. Once the toggle turns blue, the Split Sleeper Hours have been enabled for the Driver.