How to view Split Sleeper Berth on Driver App

    Audience  Drivers 
    Applies To  Driver App 

     

    Introduction

    This article addresses how drivers can utilize the split sleeper toggle feature using US cycles in the Motive driver application.

     

    Note: It’s possible that drivers will see violations before both qualifying periods are completed. Drivers are required to complete both qualifying split sleeper pairing in order to avoid HOS violations. Once the second period has been completed, the driver’s clocks will recalculate, and any previously generated violations will be removed accordingly.

    As a reminder, HoS violations displayed in the driver app are not actual violations and drivers are recommended to always use DOT Inspection mode during roadside inspections. The integrity of their records will be maintained and no violation flags will be presented to enforcement agents.

     

    Steps: viewing Split Sleeper Berth on Driver App

    Ensure you have updated your Driver App to get the best experience.

    1. Log into the Driver App.
    2. On the Home screen, swipe up to view HOS recap.
    3. Turn on the Show Split Clocks toggle for iOS. For the Android app, check the Show Split SB Clocks checkbox at the bottom of the Primary Cycle tab.

    Note: Drivers are required to spend at least 2 hours in off-duty or sleeper berth status to enable the Show Split SB Clocks toggle. 

    spli1.jpg

    4. View your available hours, including the time from the first qualifying period. The driving lock screen also shows Split SB Clocks.
    5. Select Show Split SB Clocks or Show Default Clocks to toggle between the clocks in driving lock mode.

     

    Related Content

    Share this with others