Use the Motive Driver App to review assigned dispatches, follow the stop-by-stop workflow, submit required forms, and keep your fleet updated. If you and a co-driver switch shifts during an active dispatch, you can hand off dispatch access when the feature is available for your fleet.
NOTE: This article is intended for drivers. All steps described here are performed in the Motive Driver App.
Dispatch details, forms, and some button names vary by fleet and TMS integration. Follow the instructions shown in your app and your fleet’s procedures.
1. Find and review a dispatch
You may receive a notification when a dispatch is assigned. To find it, open the Motive Driver App and tap the Dispatches tile on the home screen.
Open the dispatch and review the information shown, such as the stops, addresses, scheduled times, load details, instructions, and required tasks. Tap a stop to view its details.
Dispatches may be assigned to you, to a vehicle, or to both. If the dispatch is assigned to a vehicle, connect the Driver App to the correct vehicle so the dispatch appears.
2. Accept and start the dispatch
If the dispatch is marked To review, select it, review the details, and tap Review and Accept. Confirm acceptance when prompted. Accepting a dispatch does not necessarily start it.
When you are ready to begin, open the dispatch and tap Start Dispatch. The dispatch becomes active in your workflow. Do not start it until you are ready to work on it.
3. Follow the stops and complete required tasks
The dispatch details show the stops in the order provided for your trip. At each stop:
- Go to the stop shown in the app. Check the location and instructions before proceeding.
- When you arrive, use the Arrive control if the app prompts you. For supported, geocoded stops, the app may detect or guide the arrival step automatically. If the stop is not geocoded, you may need to complete the arrival step manually.
- Complete the forms and tasks shown for that stop. Depending on your fleet’s setup, these may include notes, photos, document uploads, signatures, delivery receipts, or other required information.
- Submit each form and wait for it to save. Some dispatch workflows unlock forms in sequence, so you may need to submit the current form before the next one becomes available.
- When the stop is complete, tap Depart or Complete Stop, whichever appears in your app. Follow any confirmation prompt before heading to the next stop.
Repeat these steps for each stop. If the app shows a different sequence or button label, follow the workflow displayed for your dispatch. Do not skip required forms or stops; contact your dispatcher if the route or instructions appear incorrect.
4. Complete the dispatch
After you finish the final stop and its required tasks, complete any remaining departure or review steps shown in the app. Depending on your fleet’s configuration, the dispatch may complete automatically after the last stop, or the app may ask you to review and complete it manually.
You can find completed dispatches from Menu > Dispatches > Completed.
Completed dispatches are generally available for review, but you may not be able to submit new form entries to them.
Other dispatch tools
- To contact your dispatcher, open the dispatch details and tap the Messages icon.
- Some fleets provide standalone forms under Additional Forms. These are not tied to a specific dispatch stop; use them for the purpose described by your fleet.
- Submit only accurate information. If you make a mistake or a stop needs to be changed, message your dispatcher for guidance rather than continuing with incorrect details.
Team driving: Hand off an active dispatch to your co-driver
Use dispatch handoff when you and your co-driver switch driving shifts and the other driver needs to continue the active dispatch in the Motive Driver App. A handoff changes which driver can access the active dispatch; it is not simultaneous shared access, and it does not transfer or update driver logs or hours-of-service records. Continue to follow your fleet’s procedures for those records.
Before you hand off
Make sure that:
- The dispatch has been started and is active. You cannot hand off a dispatch before it starts.
- The intended co-driver is eligible and appears in the dispatch’s Driving Team card.
- Your phone has an active internet connection. Handoffs cannot be completed offline.
- Any unsynced dispatch changes have synced.
- Dispatch handoff is supported and enabled for your fleet’s dispatch integration. Availability depends on your TMS or dispatch partner and its configuration.
Hand off the dispatch
- Open the active dispatch and its details.
- Find the Driving Team card and confirm that the correct co-driver is listed.
If the correct co-driver is not listed, do not continue. Follow your fleet’s process to correct the team information. 3. Tap Change Driver. 4. Review the confirmation. Verify that it shows the correct receiving driver and dispatch. The dispatch will be removed from your Driver App after the handoff.
- Tap Confirm to hand off access. Tap Cancel if you do not want to continue.
- Keep the app connected while it syncs. Wait for the success message and refreshed dispatch view.
- Ask the receiving driver to open or refresh the Motive Driver App and confirm that the dispatch appears in their active list before continuing.
After a successful handoff, you should no longer see the dispatch in your active list. If the team needs to switch back, the driver who currently has access can use the same steps while the dispatch is still active and the other driver is eligible.
Here is a video explaining the same.
Troubleshooting
I can’t find the dispatch
- Check that you are signed in to the correct fleet account.
- If the dispatch is assigned to a vehicle, connect the Driver App to that vehicle.
- Refresh the Dispatches screen or close and reopen it.
- If it still does not appear, contact your dispatcher to confirm the assignment and dispatch status.
I can’t start the dispatch or continue to the next step
Check that you accepted the dispatch if required, that you completed the previous stop or form, and that your phone has an internet connection. Some stops or forms become available only after the preceding step is submitted. Contact your dispatcher if the dispatch details or stop order look incorrect.
A stop or form is missing, locked, or showing the wrong details
Follow the stop order and prompts in the app. Confirm you have completed the previous required form or arrival step. If the issue continues, message your dispatcher and provide the dispatch ID, stop, and a description of what is missing or incorrect.
I don’t see Change Driver or the handoff does not complete
Check that the dispatch is active, the intended co-driver is listed in the Driving Team card, your phone is online, and your fleet’s integration supports and has enabled dispatch handoff. Make sure pending dispatch changes have synced. If the handoff still fails, contact your fleet administrator or support team with the dispatch ID, current driver, intended co-driver, TMS or dispatch partner, time of the issue, and any error message shown.
Share this with others