This feature allows the nearby assets to automatically get paired with the vehicles. It enables the Fleet Admins to speculate which vehicle is attached to which Asset at one place under Fleet View.
| Note: When an asset starts moving, the Asset Gateway service looks at the location, speed, and direction of the company’s every vehicle. |
Pre-requisites for automatic Asset/Vehicle pairing
For a successful pairing, ensure your Asset/Vehicle fulfills the following criteria:
- The vehicle should be located within 2 miles of the asset.
- The vehicle should be moving at 5 mph or more.
- The asset should be consecutively moving for more than 5 minutes at 5mph or more.
- The vehicle and asset should travel in the same direction plus/minus 45 degrees.
- Asset Gateway Mini must be cable-powered.
- Asset Gateway Max battery percentage should be above 50%.
Pairing Conditions:
- If there’s only 1 matched vehicle then it's used as a paired vehicle for an asset.
- If an asset stops then the current matched vehicle (if any) is unassigned from the asset.
- If no matched vehicles are found or there is more than 1 match, then the pairing logic is repeated when the next Asset Gateway ping is received, usually within the next 1 to 5 minutes.
Was this article helpful?
Share this with others