AI Dashcam Plus (AIDC+) combines the functionality of a Vehicle Gateway and a Dashcam into a single device, so you do not need a separate Vehicle Gateway. AIDC+ needs to be assigned to a vehicle and mounted before it can start recording and detecting unsafe driving. You can install AIDC+ using the Motive Fleet App.
Before you begin
- Confirm your vehicle's diagnostic port type (RP1226, OBD-II, or J1939) and have the matching Motive cable and vehicle adapter ready. Check the label on the cable if you are not sure.
- Install the Motive Fleet App on your phone and log in with your Fleet Admin, Fleet Manager, or Installer credentials.
- Park the vehicle safely, engage the parking brake, and turn off the engine.
Installing AI Dashcam Plus on Fleet App
-
Log in to the Fleet App and tap More > Devices > Install device
-
Tap AI Dashcam Plus to continue.
-
Scan the QR code available on the device, or tap Enter VIN Manually to type it in.
- Confirm the device details and tap Confirm.
How to know it worked: The vehicle screen shows the AI Dashcam Plus assigned and ready for physical installation. Tap Continue.
If it doesn't: If the QR code won't scan, tap Select from list and choose the device by serial number instead. Never scan or enter the serial number of the vehicle adapter (VIA), only the AI Dashcam Plus itself.
Connect the AI Dashcam Plus
- Select your cable from the dropdown and tap Continue.
- Plug the AI Dashcam Plus into the vehicle adapter, then connect the adapter to the Motive cable and the cable to your vehicle's diagnostic port. Do not mount the camera to the windshield yet.
- Tap Next on the Connect screen, then start the engine.
How to know it worked: The right-side LED turns solid blue after a few seconds of booting up. Tap the current LED status option in the app to confirm.
If it doesn't: A blinking purple LED means a loose or disconnected cable. Check both ends of the connection. If the LED stays off, confirm the vehicle's diagnostic port has power and the ignition is on.
Choose and test a mounting location
- Pick a mounting spot:
- Top mount (recommended): No more than 8.5 inches below the top edge of the wiper sweep area, just behind the rearview mirror.
- Bottom mount: No more than 7 inches above the bottom edge for vehicles with metal sun visors.
- Make sure the mount does not block the driver's view of the road and is not behind tinted glass or a sun visor.
- Hold the camera at the chosen spot with the cable running from the top, and adjust the angle with the Allen key so both road and driver views are clear.
- Tap Check camera view to preview the feed. If the view looks off, adjust the angle and check again before moving on.
Mount the AI Dashcam Plus
- Clean the windshield with the provided alcohol wipes and let it dry.
- Peel off the adhesive backing and press the camera firmly onto the windshield for at least 10 seconds, dual-lens side facing the road.
- Secure the cable with the provided clips.
- Tap Next, review the LED states, then tap Finish.
How to know it worked: The AI Dashcam Plus shows as installed and recording in the vehicle's device status. This can take a few minutes to update.
Next steps
- Pair a driver's mobile device so trips and safety events are attributed to the right driver.
Share this with others