Install Motive Beacon

Motive Beacon is a small Bluetooth tracker for tools, containers, and other equipment too small or low-value for a full GPS tracker. It broadcasts a Bluetooth signal that nearby Motive devices locate and report as its last-seen location. Beacon needs to be mounted and activated before it can start reporting a last-seen location, so attach it to your asset.

Note: For live, continuous GPS tracking on a trailer or piece of heavy equipment, use an Asset Gateway Mini instead. Also note that the Vehicle Gateways devices cannot support Beacons and Environmental Sensors simultaneously.

Required items

  • Alcohol wipe
  • Mounting plate
  • Reset pin
  • Spare adhesive 
  • T6 Torx screwdriver 
  • Screws that came in the box
Note: For metallic mounting surfaces, use the small screws. For wooden surfaces, use the large screws.

Mount the Beacon

  1. Ensure the Bluetooth is turned on in the Fleet App, then go to More > Settings. 
  2. Tap Bluetooth and tap the toggle to enable Bluetooth Listening.
  3. Once done, wipe the mounting area for Motive Beacon with the provided alcohol wipe and let it dry.
  1. Remove the adhesive backing from the mounting plate and press it firmly onto the cleaned surface.
  1. Secure the plate with the small screws (metal) or large screws (wood).
  1. Attach the Beacon to the plate and secure it with the T6 device screws.

Activate the Beacon

  1. Using the reset pin, press the pinhole reset button on the side of the device.

The LED flashes green once, displaying that the broadcasting has started. To double-check it's still broadcasting, press the pinhole again to view a single blue flash.

Note: An orange flash means an error occurred. Try the reset again, there's no remote way to activate a Beacon. It must be triggered by physically pressing the pinhole button on the device.

Assign the Beacon to an asset

Using the Fleet App:

  1. Log in to the Fleet App and tap More > Devices.
  1. Tap Beacon and follow the steps displayed by Fleet App.

3. Tap Install Beacon.

4. Activate the Motive Beacon as instructed on Fleet App.

5. Tap Allow to enable Bluetooth access.

6. Once the device is detected, tap Continue.

7. Select the required Asset.

8. Tap Continue.

Note: Location updates depend on nearby devices. A Beacon traveling with a Motive Vehicle Gateway updates as often as once per minute. Sitting in a yard or warehouse, it updates whenever a Motive device passes within Bluetooth range.

Next Steps 

  • You can view Beacon locations alongside your other assets within the Motive Fleet Dashboard and the Motive Fleet App.
Was this article helpful?

Share this with others