Fleets can require drivers to complete their beginning-of-day Driver Walkthrough before they can unlock their Motive Card. This helps tie card spend to drivers who have completed their start-of-day steps. When the walkthrough includes connecting to a vehicle, it also helps reduce unidentified driving.
Overview
- Prerequisite step, not a replacement unlock option: Completing the walkthrough doesn’t unlock the card. It lets the driver proceed with the usual unlock.
- Fleet-defined steps: Fleet admins choose what drivers must do first, such as connecting to the vehicle, completing an inspection or uploading a document.
- Driver instructions: If drivers attempt an early unlock; whether through the Driver App, SMS, or when requesting a Motive Fuel Code, they are notified about the specific walkthrough required to proceed.
- Optional activation: Fleets that don’t turn this on won’t see any change.
| Note: This feature is only available for Motive Card customers. |
Setting up the walkthrough requirement for Motive Card unlock
- Log in to the Fleet Dashboard > click Admin.
- Click Driver App > Driver Walkthrough > Create Walkthrough.
- Set the Trigger type to Beginning of the day and walkthrough audience from dropdowns.
- For walkthrough lock actions dropdown, select Unlock Motive Card.
- Add a name for the created walkthrough > click Save.
Driver view in the Driver App
- Log in to the Driver App > tap Unlock your card.
- If the walkthrough isn’t complete, a Walkthrough required displays > tap Begin walkthrough.
- Complete walkthrough by completing all the steps configured by your company like connecting to vehicle, going on-duty, finishing DVIRs. Once done, the Card is unlocked for 30 minutes.
Driver view via SMS
The driver receives a link via SMS to the walkthrough. After completing it, they can use their card’s last 4 digits or Card ID to continue.
FAQs
Which steps can a fleet require before unlocking?
Any steps the fleet already builds into its beginning-of-day Driver Walkthrough, such as connecting to the vehicle, changing duty status, completing a vehicle inspection or uploading a document.
Who can set it up, and does it change anything for fleets that don’t use it?
Fleets set it up in the walkthrough configuration. If a fleet doesn’t select "Unlock Motive Card" in a walkthrough, nothing changes for its drivers.
What if a driver dismisses the popup to complete the walkthrough?
The card stays locked.
What if a driver isn’t using the Driver App, or is on an older version than v111?
The walkthrough requirement applies to drivers on Driver App v111 or later. Drivers on earlier versions, or who don’t use the Driver App, can unlock their card without completing it. To apply it to all drivers, make sure they’re on the latest Driver App.
Can admins see who changed this setting?
Yes, changes are recorded in the audit log.
Share this with others