Install Battery-Powered Asset Gateway Mini

Motive Asset Gateway is a tracking solution for trailers, heavy equipment, and other valuable assets, giving fleets reliable visibility into asset location and utilization. Battery-powered Asset Gateway Mini is suitable for assets with no power source.

Before you begin

  • Locate the device's serial number on the label on the front of the device or the shipping box.
  • Have the pinhole reset tool that came in the box handy.

Selecting and pairing an Asset Gateway Mini with an asset 

  1. Log in to the Fleet App and go to Devices.
  2. Scroll down to the Asset Gateway section and tap Install Asset Gateway.
  1. Select your Asset Gateway Mini from the list or enter its serial number in the search bar to find and select it. 
  1. If your selected Asset Gateway Mini is not assigned to any asset at the moment, a pop-up appears to confirm that it is ready to be assigned. 
  2. Tap Continue. 
Note: For already assigned devices, first you have to unassign the Asset Gateway Mini from the previous asset to assign it to another asset. 
  1. Select your Asset from the list or enter its Asset ID in the search bar to find and pair it with the selected Asset Gateway Mini.
  1. View the Asset Details and tap Confirm. 
  1. A loading pop-up appears while the Asset Gateway Mini is being assigned to the selected asset.
  1. Once the Asset Gateway Mini is assigned to the selected asset, a confirmation pop-up appears.
  2. Tap Continue. 

Installing and testing a battery-powered Asset Gateway Mini 

  1. Tap Install without cable to install a battery-powered Asset Gateway Mini. 
  1. Select your preferred Unpowered check-in rate and tap Confirm.
  1. Tap Start guided installation to follow step-by-step instructions for installation. 
Note: Skipping guided installation allows installers who are aware of the steps to skip past all the steps and simply connect the Asset Gateway Mini and run tests if necessary. 
  1. When you are prepared to mount the device, tap Next. 
  1. Place or hold the device in the intended location and tap AG in chosen location.
  1. To test cellular and GPS connectivity, use the provided pin to press the pinhole reset button on the side of your device, which will send a testing signal. 
  2. Once your LED light flashes blue and the device is switched on, tap Light flashed blue. 

Note: Tap LED did not flash blue if your LED light is white, orange, or red. You will be prompted to confirm the color of your LED light. Select the color of your LED light and follow the given instructions.  This is what different LED light colours stand for:

  • White light means your device needs to finish booting or updating. Motive recommends waiting at least 5 minutes before pressing the pinhole again.
  • Orange light means your device is overheated and needs to cool down. Motive recommends waiting at least 5 minutes before pressing the pinhole again.
  • Red light means your device battery is low, and you will get the option to select another device to continue the installation.
  1. A loading pop-up appears while the testing is in progress. 
  1. Once the test is complete, a confirmation pop-up appears with green tickmarks to verify GPS and LTE signals are strong. 
  2. Tap Continue. 
Note: If your test results in weak or failed signals for GPS and/or LTE, we recommend checking how your device is installed to ensure it is positioned with a clear view of the sky. A weak cellular signal may affect the device’s performance.
  1. Follow the given instructions to mount the Asset Gateway in your chosen location.
  2. Once done, tap AG is mounted.
  1. Once the installation is complete, view the asset paired with your Asset Gateway or install more devices. 


How to know it worked: The LED flashes blue, showing the device is powered on and connecting.

If it doesn't: A solid yellow LED means weak cellular signal. Try a different mounting spot. If nothing lights up at all, hold the reset button for 10 seconds to force a reboot and try again.

Next steps

  • Confirm the battery-powered Asset Gateway Mini's data is populating in the Fleet Dashboard. Go to the asset's page in the Fleet App or Fleet Dashboard. The asset's location appears on the Live page. This can take 15-30 minutes for cable-powered devices or up to 48 hours for battery-powered devices on their first fix. See Fleet View Live Tracking.
Was this article helpful?

Share this with others